|
 |
RR 1381 WBA Release System
|
|
|
|
|
|
|
Home
Composite Releases
Rotational Releases
Rubber Releases
Plastic Releases
Urethane Releases
Specialty Releases
Request a Sample
Other Products
About Us
Privacy Policy
Security Policy
|
DESCRIPTION:
RR 1381 WBA is a silicone polymer release emulsion that gives outstanding results for tire release applications. RR 1381 WBA helps reduce rust and corrosion in steel molds. |
|
|
|
|
|
BENEFITS:
No transfer -- post-finishing problems virtually eliminated.
No knit lines, cracks, or splits -- low scrap rate.
Very low build-up -- more production time between mold cleanings.
|
|
|
|
|
|
PROPERTIES:
RR 1381 WBA is for application to mold surfaces above 212°F at the time of application. |
|
|
|
|
|
APPLICATION PROCEDURES:
RR 1381 WBA can best be applied by using a fine mist spray. Clean, rinse, and dry mold thoroughly. Apply three light coats of RR 1381 WBA at molding temperature. Allow 5 minutes between coats. Repeat as needed, using one1 light coat, normally at break time. |
|
|
|
|
|
HANDLING:
RR 1381 WBA should be stored at temperatures below 90°F. Protect from freezing. |
|
|
|
|
|
PACKAGING:
RR 1381 WBA is available in 5-gallon pails, 55-gallon drums, and 250-gallon totes. |
|
|
|
|
|
Releasomers® is a trademark of Stoner Inc. All contents © Stoner, Inc. 2012. All rights reserved. |
|