 |
|
| A trademark of Stoner Inc. |
| 1070 Robert Fulton Hwy. |
| Quarryville, PA 17566 |
| 800-227-5538 • 800-515-5150 (fax) |
| releasomers@stonersolutions.com |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Releasomers Benefits: |
|
• Multiple Releases
• Increased Productivity
• No Transfer
• Reduced Scrap
• No Finishing Problems
• No Knit Lines or Cracks |
|
|
Water Based Release Agents
|
|
|
|
|
|
|
|
|
RR 380 WB1 is an advanced water-based, semi-permanent, silicone resin emulsion. When applied to a clean mold or platen it forms a durable release surface offering a high number of releases between applications. RR 380 WB1 performs well for molding of most thermosetting rubber materials. It is particularly effective for rubber-to-metal bonding applications.
|
|
|
|
|
|
RR 1381 WB is a silicone resin emulsion, semi-permanent release that gives outstanding results. Applied to a clean mold, it forms a smooth, continuous film with good adhesion to the mold surface.
|
|
|
|
|
|
RR 1381 WBA is a version of RR 1381 WB which is used in the tire molding industry.
|
|
|
|
|
|
RR-5 HOT WB is a highly effective, semi-permanent mold release agent. When applied to a clean mold, it forms a smooth, continuous film with good adhesion to the mold surface. This film gives easy release and multiple releases with most thermosetting rubber and plastic materials.
|
|
|
|
|
|
RC 30 WB is a clean, effective, water-based fluorocarbon mold release agent developed for silicone rubber molding, hard-to-release elastomers, and thermoset plastic molding. Applied to a clean surface, RC 30 WB adheres on contact, leaving a thin, translucent, dry film ready immediately as a mold release or low-speed, light-load lubricant. RC 30 WB is a good choice in applications where a silicone release is not permitted.
|
|
|
|
|
|
XC-33 release agent is a water-dilutable fluorochemical emulsion designed to exhibit outstanding release characteristics. XC-33 is effective for silicone release as well as many other elastomers. XC-33 is not a semi-permanent release.
|
|
|
|
|
|
FRP 1923 WB is a room temperature curing, water-based, semi-permanent release agent for the Fiber Reinforced Plastic (FRP) industry. FRP 1923 WB gives easy, multiple releases.
|
|
|
|
|
|
All contents © Stoner, Inc. 2008. All rights reserved.
|
|
|
|