|
 |
Composite Mold Releases
|
|
|
|
|
Home
Composite Releases
Rotational Releases
Rubber Releases
Plastic Releases
Urethane Releases
Specialty Releases
Request a Sample
Other Products
About Us
Privacy Policy
Security Policy
Member of:
|
| Have a Special Application or Mold Release Need? |
|
We have or can formulate products for your specific molding process and materials,
delivery systems, or packaging preference. Click below to discuss the next step. |
|
 |
|
|
|
|
G492 FRP Release
• Time-saving, semi-permanent mold release for molded composite materials
• Combines fast curing with tougher, chemical and abrasion resistance
• Cures at ambient temperatures and operates easily above 800°F
• Ready to use WOWO (wipe on, wipe off) formula
• Fewer coats, faster cure, increased productivity
G491 Mold Sealer
• Cures to a hard gloss film that protects molds and keeps them in production longer
• Hard gloss finish rejuvenates old molds and gives them new life
• Lets new molds run with ease – less break in time
• Reduces downtime which adds value to your process
• Easy to apply – no special tools or procedures needed
• Boosts productivity – requires fewer coats and cures faster
• Lower odor
G471 XK-22 LV.5 Semi-Permanent Mold Release for Composites
• Unique, highly effective, semi-permanent mold release for composites
• Combines fast cure with outstanding chemical and abrasion resistance
• Non-silicone, non-contaminating release surface
• Operates easily above 850°F
• Cures at ambient temperatures
• Stable resin solution – long shelf life
• Click to learn more
G476 FRP 1923 WB Mold Release
• Water-based, WOLO (wipe on, leave on) formula
• Semi-permanent release agent for reinforced plastics
• Keeps parts from sticking
• Cures at room temperature
• No need to polish molds after application
• Click to learn more
G485 RC-30 Mold Release
• Time-saving release agent for molded rubber, composites, and similar materials
• Developed for silicone rubber, elastomers, and thermoset plastic molding operations
• Water-based, non-silicone, high temperature formula adheres on contact
• Very low odor, chemically stable, and can be applied safely to most substrates
• Ready immediately as a mold release or low-speed, light-load lubricant
• Click to learn more
E455 Stoner Thermoset Mold Release
• Convenient aerosol contains no silicones or oils
• Eliminates the need for paste waxes
• Allows molded parts to be painted, hot stamped, or otherwise decorated
• Saves time – allows parts to remove quickly and easily from molds
• Improves part appearance and reduces defects caused by sticking
• Contains no chlorinated solvents such as methylene chloride or trichloroethylene
• Excellent adhesion to mold surfaces
• Click to learn more
M714 Stoner Thermoset Mold Release
• Time-saving, anti-stick lubricant for reinforced thermosets and filament winding
• Contains no silicones or oils
• Eliminates the need for paste waxes
• Ready to use – no need for dilution
• Allows molded parts to be painted, hot stamped, or otherwise decorated
• Saves time – allows parts to remove quickly and easily from molds
• Improves part appearance and reduces defects caused by sticking
• Contains no chlorinated solvents such as methylene chloride or trichloroethylene
• Excellent adhesion to mold surfaces
E497 Stoner Thermoset Mold Release
• Convenient aerosol contains no silicones or oils
• Eliminates the need for paste waxes
• Allows molded parts to be painted, hot stamped, or otherwise decorated
• Saves time – allows parts to remove quickly and easily from molds
• Improves part appearance and reduces defects caused by sticking
• Excellent adhesion to mold surfaces
• Click to learn more
M704 Stoner Thermoset Mold Release
• Time-saving, anti-stick lubricant for molded thermoset plastics, rubber, and similar materials
• Ready-to-use, requires no dilution
• Apply a thin coating with a spray system
• Contains no silicone
G458 JMA-3E Semi-Permanent Mold Release
• Semi-permanent, high temperature formula operates easily above 850°F
• Durable, long wearing, and not easily scratched off of mold surfaces
• Extends mold life
• Non-silicone, non-contaminating release surface
• Non-transferring to molded parts
• Allows for painting and other post-decorative processes
G483 XC-33 Fluoropolymer Mold Release
• Water-based mold coating for plastics, rubber, metals, and more
• Non-transferring, non-silicone, dilutable emulsion
• Forms a thin, uniform film on a wide variety of substrates
• Parts release quickly and easily
• Click to learn more
G451 RR-5 Hot EF-1 Semi-Permanent Release System
• Forms a smooth, continuous film with good adhesion to the mold surface
• Quickly and easily releases most rubber and plastic materials
• Multiple releases per application – increases productivity
• No transfer – post-finishing problems virtually eliminated
• No knit lines, cracks, or splits – low scrap rate
• Contains no ozone-depleting chemicals
• Click to learn more
G457 RR-5 COLD EF-1 Semi-Permanent Release System
• Solvent-based release agent for molded materials
• A release base coat for RR-5 Hot EF-1, which greatly extends time between mold cleanings
• Forms a smooth, continuous film with good adhesion to the mold surface
• Non-transferring mold coating keeps parts from sticking
• Lets parts release quickly and easily
• Reduces down time and increases production
• Contains no ozone-depleting chemicals
• Click to learn more
E408 Stoner Dry Film Mold Release
• Convenient aerosol contains no silicones, oils, or waxes
• Dry, anti-stick coating provides fast, easy part removal
• Improves molding efficiency in many processes
• Improves part appearance and reduces defects caused by sticking
• Formulated to provide high levels of user and environmental safety
• Click to learn more
|
|
|
|
|
|
| Have a Special Application or Mold Release Need? |
|
We have or can formulate products for your specific molding process and materials,
delivery systems, or packaging preference. Click below to discuss the next step. |
|
|
|
|
|
|
|
|
All contents © 2012, Stoner Inc. All rights reserved. Releasomers® is a registered trademark of Stoner Inc. |
|
|
|