 |
Rubber Mold Releases
|
|
|
|
|
Home
Composite Releases
Rotational Releases
Rubber Releases
Plastic Releases
Urethane Releases
Specialty Releases
Request a Sample
Other Products
About Us
Privacy Policy
Security Policy
|
| Have a Special Application or Mold Release Need? |
|
We have or can formulate products for your specific molding process and materials,
delivery systems, or packaging preference. Click below to discuss the next step. |
|
 |
|
|
|
|
G451 RR-5 Hot EF-1 Semi-Permanent Release System
• Forms a smooth, continuous film with good adhesion to the mold surface
• Quickly and easily releases most rubber and plastic materials
• Multiple releases per application – increases productivity
• No transfer – post-finishing problems virtually eliminated
• No knit lines, cracks, or splits – low scrap rate
• Contains no ozone-depleting chemicals
• Click to learn more
• Also available in convenient, easy to apply aerosol (G450)
G457 RR-5 COLD EF-1 Semi-Permanent Release System
• Solvent-based release agent for molded materials
• A release base coat for RR-5 Hot EF-1 which greatly extends time between mold cleanings
• Forms a smooth, continuous film with good adhesion to the mold surface
• Non-transferring mold coating keeps parts from sticking
• Lets parts release quickly and easily
• Reduces down time and increases production
• Contains no ozone-depleting chemicals
• Click to learn more
• Also available in convenient, easy to apply aerosol (G449)
G480 RR 1381 WBA Release System
• Polymer release emulsion for tires & other rubber molding applications
• No transfer – post-finishing problems virtually eliminated
• No knit lines, cracks, or splits – low scrap rate
• Very low build-up – more production time between mold cleanings
• For mold surfaces above 212°F at the time of application
• Click to learn more
G460 BL-3 Hot Semi-Permanent Solvent Based Release System
• Designed for flexible mold surfaces and normal metal molds
• Gives quick, easy part release through many molding cycles
• Highly effective for halogenated or peroxide-cured elastomers
• Easy release for low tear stocks
• Works in autoclave environment
• Click to learn more
G464 Release Coat 33 Bake On Release System
• Highly effective, semi-permanent mold release agent
• Forms a smooth, continuous film with good adhesion to the mold surface
• Highly abrasion resistant film gives easy, long lasting release
• Multiple releases per application – increases productivity
• No transfer – post-finishing problems virtually eliminated
• No knit lines, cracks, or splits – low scrap rate
• Temperature capabilities up to 575°F
• Molds stay clean – reduces down time
• Click to learn more
G471 XK-22 LV.5 Semi-Permanent Mold Release for Composites
• Unique, highly effective, semi-permanent mold release for composites
• Combines fast cure with outstanding chemical and abrasion resistance
• Non-silicone, non-contaminating release surface
• Operates easily above 850°F
• Cures at ambient temperatures
• Stable resin solution – long shelf life
• Click to learn more
G476 FRP 1923 Semi-Permanent Mold Release
• Water-based, WOLO (wipe on, leave on) formula
• Semi-permanent release agent for reinforced plastics
• Keeps parts from sticking
• Cures at room temperature
• No need to polish molds after application
• Click to learn more
G481 RR-5 HOT WB Semi-Permanent Release System
• Water-based resin emulsion, semi-permanent release
• Gives outstanding results in very tough release applications
• Forms a smooth, continuous film with good adhesion to the mold surface
• Multiple releases per application – increases productivity
• No transfer – post-finishing problems virtually eliminated
• No knit lines, cracks, or splits – low scrap rate
• Very low build-up – more production time between mold cleanings
• No VOCs or ODCs – carrier is water only
• For mold surfaces above 212°F at the time of application
• Click to learn more
G482 RR 380 WB1 Semi-Permanent Mold Release
• Advanced semi-permanent release based on resin emulsion technology
• Gives excellent results for the most difficult molding applications
• Forms a thin, smooth, highly durable film with good adhesion to the mold
• Provides long lasting, easy release with minimal rejects
• Releases most thermosetting plastic and elastomers (not for silicone rubber applications)
• Non-flammable, rapid cure formula with low build-up
• Click to learn more
G483 XC-33 Fluoropolymer Mold Release
• Water-based mold coating for plastics, rubber, metals, and more
• Non-transferring, non-silicone, dilutable emulsion
• Forms a thin, uniform film on a wide variety of substrates
• Parts release quickly and easily
• Click to learn more
G484 RR 1381 Semi-Permanent Mold Release
• Water-based resin emulsion, semi-permanent release
• Gives outstanding results in very tough release applications
• Forms a smooth, continuous film with good adhesion to the mold surface
• Multiple releases per application – increases productivity
• No transfer – post-finishing problems virtually eliminated
• No knit lines, cracks, or splits – low scrap rate
• Very low build-up – more production time between mold cleanings
• No VOCs or ODCs – carrier is water only
• Click to learn more
G485 RC-30 Semi-Permanent Mold Release
• Developed for silicone rubber and most elastomers and thermoset plastic molding
• Adheres on contact, leaving a thin, translucent, dry film
• Ready immediately as a mold release or low-speed, light-load lubricant
• Water-based, non-silicone, high temperature formula up to 500°F (260°C)
• Very low odor, chemically stable, good adhesion to most substrates
• Does not interfere with post-finishing operations
• No mold build-up or discoloration
• Click to learn more
#975 “Soap Plus” Mold Release
• Concentrated, water-based, anti-stick lubricant for molds
• Time-saving mold release for rubber, plastics, and similar materials
• Prevents sticking so you can make more high quality parts
• Quickly and easily releases parts from molds
• Simply spray on a thin coating using a spray system
A353 Stoner Endurance Mold Release
• Semi-permanent, fast curing release for most elastomers
• Convenient aerosol provides a permanent, yet removable, thin layer of anti-stick coating
• Great for touch-up. A single application allows multiple molding cycles
• Saves time – lets parts remove quickly and easily from molds
• Boosts productivity – allows multiple releases per single application
• Won't transfer or interfere with compound chemistry
• Click to learn more
A373 Stoner Fluoroelastomer Mold Release
• Semi-permanent, fast curing release for most elastomers
• Provides a permanent, yet removable, thin layer of anti-stick coating
• A single application allows multiple molding cycles
• Improves molding efficiency in many processes
• Saves time – lets parts remove quickly and easily from molds
• Boosts productivity – allows multiple releases per single application
• Won’t transfer to fluoroelastomer compound or interfere with compound chemistry
• Improves part appearance and reduces defects caused by sticking
• Click to learn more
|
|
|
|
|
|
| Have a Special Application or Mold Release Need? |
|
We have or can formulate products for your specific molding process and materials,
delivery systems, or packaging preference. Click below to discuss the next step. |
|
|
|
|
|
|
|
|
All contents © 2012, Stoner Inc. All rights reserved. Releasomers® is a registered trademark of Stoner Inc. |
|
|
|